Pertamina Hulu Energi ONWJ is a global energy company committed to business innovation and environmental leadership. With the significant worldwide growth of PHE ONWJ s oil and gas business, the need arises for an experienced to join the team located in Jakarta.
A highly respected team offering leading edge thinking and works in partnership with the business to deliver the challenging business goals. This also offers the opportunity for flexible working in delivering such goals, values and performance, and is committed to your continual training and career development.
SUBSEA PROJECT ENGINEER (SUB)
Responsibility:
1. Deliver safe and efficient subsea campaigns with focus on project execution activities.
2. Mobilize assurance coordination, liaise with HSE, Marine, Operation, Facility Integrity and Subsea Operations Technical Authority.
3. Manage the provision of CSR and diva representatives.
4. Lead the execution stages of individual campaigns for subsea data acquisition, maintenance, and repair operations.
Requirement:
1. Degree in engineering (offshore engineering) with at least 4-5 years working experience in oil and gas industry.
2. Possess strong knowledge in and be Se to implement HSE handbook of requirement, safety standard, and procedures.
3. Experience in subsea operation.
PROJECT ENGINEER (PE)
Roles (Report to Project Lead)
1. PE for fire and Gas
2. PE for Facility Improvement Projects
Responsibility:
1. Develop and lead the team to deliver results.
2. Work with other project managers/leaders to ensure common (non-dedicated) people resources have clear expectations and time availability; Identify gaps and recognize/provide resources to flit those gaps.
3. Manage contractors in assigned areas to ensure they are brought into the project the appropriate time is provide support and/or support essential, end to ensure compliance with COMPANY safety standards and contracts.
4. Develop coal estimates, monitor and control costs; develop estimated schedule, monitor and control schedule; develop KPIs with teem.
5. Within overall execution strategy provide clear design basis, operating strategy, end scope.
6. Manage the aspects of project regarding changes is the project
7. Monitor end control project schedule and progress, including contracts
8. Ensures alignment to pm-established information management system.
9. Ensure quality by looking for value: Identity the drivers, push back as needed, and address the business needs as wet as the project needs.
10. Manage project risks.
11. Deliver project HSSE / integrity management.
Requirement:
1. Engineering Degrees or Construction Management with at teens 7 years working experience is oil end gas industry.
2. Possess strong knowledge in project management system.
3. Experience in EPC project related to oil and gas industry.
4. Have good leadership skits to lead multidiscipline team in delivering project assigned.
PROJECT LEAD (PL)
Roles (Report to Project Manager):
1. Facility Improvement Projects
2. APN Development
3. Reactivation Projects
Responsibility:
1. Proactively demonstrate high degree of sophisticated decision-making /leadership struts needed to address the complex stakeholder groups end issues associated with lisle level of projects.
2. Effectively manage ongoing relationship with primary contractor - and at related vendors, suppliers to ensure their compliance with project contracting strategy.
3. Build end lad high performance teems; Develop Key Performance Indicators (KPIs)/Performance Plan/ Goats and Objectives for overall project
4. Manage overall Internal and external interfaces for project teem.
5. Develop, Implement and manage an Execution Plan, and lead execution strategies.
6. Develop critical coats and schedule estimates, address all critical project control elements, and. Cost /Schedule / Quality/ Rink Mgmt/ Info Mgmt/ etc.
7. Ensure the hit and proper implementation of execution strategy in FEL.
8. Develop end implement project contracting strategy that meets Execution/Contracting project goals.
9. Ensure the project team s compliance with all reporting requirements and establish delegation of authority within project teem for such reporting.
10. Deliver project in accordance with HOE requirements, and lead project teem personnel towards achieving this goat
11. Focus on business objectives or the big pictures of the project, above and beyond the immediate project goats.
12. Adhere to end promote by leadership the Management Framework leadership standards, including codes of ethical conduct, related to deployment of all business objectives.
13. Manage and define all aspects or risk and changed related to project
Specific Responsibility:
1. Manage development, modification and reactivation project in company.
2. Manage design, engineering procurement and construction activities for project under frisker responsibility
3. Manage team and contractors 111sf assume responsibility for progress and qualify of the project from conceptual/appraisal stage through start-up stage sod performance evaluation.
4. Develop realistic strategy to complete the project within the approved budget and manpower tenets.
5. Provide project Information to management on a timely end regular basis. Advise the management on the status end critical issues involved in the completion of the project managed.
6. Develop and maintain good working relationship within PHE ONWJ and project related government personnel to obtain approval that affect costs and schedule of the facilities.
Requirement:
1. Engineering Degree and /or Construction Management with at least 10 years working experience in Oil and gas Industry.
2. Comprehensive knowledge of project management systems (preferably those who are certified in Project Management for similar).
3. Good experience in EPCI projects in Oil and Gas development.
4. Have a good leadership in leading multidiscipline team to deliver projects.
FIELD ENGINEER (FE)
Responsibility:
1. Support field production facilities especially on operational optimization, unplanned repair, facility debottlenecking advice and supporting day to day production operation.
2. Support TAR Teem in delivering TAR Capital Value Process.
3. Manage at offshore modification by providing project leadership, cost control, planning & planning, technical and; commercial process.
4. Implement MAR/MAHAR/PHA findings and assist Operations to monitor MAR/MAHAR/PHA works.
Requirement:
1. Degree in Engineering preferably in Chemical Engineering with at least 5 years working experience in oil and gas Industry
2. Experience in oil and gas facility design and; operations, production and maintenance.
3. Possess knowledge of standard and codes end engineering principles.
4. Experience in using process engineering software.
PIPELINE SPECIALIST (PS)
Responsibility:
1. Produce annual inspection plane, manage inspection activities, review end interpret inspection results.
2. Manage of pigging operations both of routine pigging and non routine pigging.
3. Assess the effect of any process or equipment changes on pipeline integrity.
4. Assess any deviation from design specifications or parameters prior to continued service.
5. Prepare technical integrity assessment reports which provide an annual fitness for purpose status of each pipeline.
Requirement:
1. Degree in mechanical, civil, process engineering or equivalent with at least 10 years working experience in oil field related to pipeline activities,
2. Possess knowledge of pipeline regulations, industry standards, integrity assessment methods, repair methods, etc.
3. Technical knowledge and work experience in pipeline risk management and analysis.
CHEMICAL and COATING ENGINEER (CCE)
Responsibility:
1. Support the implementation of pipeline integrity management system (PIMS), risk based inspection (RBI), corrosion management system (CMS) program, design phase of the new project or development.
2. Assist operation in selecting proper production chemical to gel best production performance, optimum flow and no scale to environment
3. Provide advisory, guidelines and any appropriate approach related to risk, and other related corrosion strategy.
Requirement:
1. Chemical Engineering Degrees, petroleum and petro gas engineering with at least 10 years working experience in oil and gas industry.
2. Possess strong knowledge and troubleshooting skits is chemical system broil and gas production including corrosion, scale and wax prevention and emulsion treatment.
3. Possess strong knowledge in coating system from prepared on, standard (NACE, SSPI, ISO, etc), proper equipment for both sew and maintenance application.
CONTRACT ENGINEER (CEng)
Responsibility:
1. Develop contract compliance monitoring system hr each contract.
2. Prepare AFE package document and monitor the process.
3. Monitor and liaise with PSCM contract engineer from the tender until the awarding stage.
4. Monitor expenditures and contract expenditures end provide monthly forecast spending breach individual contract at the beginning of the month.
Requirement:
1. Degree in engineering with at least 10 years working experience in all end gee Industry.
2. Possess strong knowledge in contractual end contract development
3. Possess strong knowledge hr BP Migas regulation especially PTK 001.
SENIOR PROCESS SAFETY ENGINEER (SPR)
Responsibility:
1. Develop and be responsible for process safety design of project end operations.
2. Responsible for the development of process safety management and activities for both existing operation end new projects.
3. Responsible for and facilitate risk/safety studies (it HAZOP) including reviewing end develop quantitative risk analysis.
4. Develop contractors scope of work, provide supervision end review contractor deliverables related with process safety engineering end ensure the design comply with PHE specification/code standard Sir project during appraisals end execution (EPCI).
Requirement:
1. Bachelor Degree Engineering, preferably chemical or petrochemical engineering with at least 12 years working experience in oil and gee Industry.
2. Possess strong knowledge in oil and gas facility design and operation, standard and codes, engineering principle, arid using process safety engineering software
3. Possess strong knowledge in process safety design for project end operations life cycle.
4. Possess strong knowledge in process safety end risk management both qualitatively and quantitatively.
5. Show expertise to read HAZOP, HAZID and LOPA studies and other risk assessment methods.
SENIOR PIPELINE ENGINEER (SPE)
Responsibility:
1. Development of specifications, design, procurement, fabrication, installation, testing, and commissioning of subsea export pipeline and production flowline systems, and end terminations.
2. Preliminary design hr optimum routing, integrity, installation and stability as wells interface and risk management for at project phases.
3. Manage interfaces with project team, FEED & execution contractors and ensure compliance whit internal standards, industry guidelines and applications government codes and regulations.
4. Provide quality assurance function for all contractor pipeline engineering work hr order to achieve the required standard.
5. Provide detailed pipeline engineering study hr project of alt size.
6. Coordinate project pipeline engineering end interface with other function
Requirement:
1. Degree in Mechanical Engineering or ocean engineering with at least 12 years working experience in oil and gas project engineering.
2. Capable of serving as Pipeline Lead on projects, including generation of detailed functional specifications and bid packages, perform bid analysis, review of design and test documentation, interface management, QA/QC end testing oversight, integration testing, pipeline installation and commissioning.
3. Demonstrated ability to drive incident free HSE radium.
4. Capable of managing contracts; monitoring and approving contractors plans, procedures, end work output knowledge of contract management procedures.
5. Demonstrated experience in selecting/managing large contracts; monitoring and approving contractor s plane, procedures, and work output. Able to anticipate and mitigate both internal and external technical /schedule risk.
6. Has good knowledge of economic drivers (including full field life cycle costs) end sees this knowledge to make or Influence decisions.
7. Demonstrated capability of working as part of a multifunctional asset teem, including vendor management (communication, coat schedule, MOC, etc.).
8. Possess strong knowledge in oil and gas facilities, standard, codes in pipeline engineering.
9. Good experience in pipeline repair engineering.
SENIOR STRUCTURE ENGINEER (SSE)
Responsibility:
1. Coordinate the implementation of structural integrity management programs on company facilities.
2. Provide structural engineering consultancy in design, analysis, fabrication and installation of a new development or modification is existing structures.
3. Provide assurance that company specifications, applicable codes and standards for structures are compiled.
4. Provide structural engineering consultancy hr deity operations activities that have impact on structures.
5. Perform rink assessment end analysis on existing structures due is anomalies.
6. Comply with the Company safety, quality end environmental requirements.
Requirement:
1. Civil Engineering Degrees or Structural Engineering Degrees with at least 10 years working experience in oil and gas industry.
2. Good knowledge of engineering principles, codes, and standards.
3. Possess strong knowledge in structural analysis software i.e SACS.
4. Basic understanding of HSE theory arid applications.
5. Good knowledge of inspection, maintenance, and repair methods.
SENIOR ELECTRICAL ENGINEER (SLE)
Responsibility:
1. Provide electrical engineering advices and recommendations for continuous electrical performance Improvements.
2. Develop end improve electrical engineering requirements and standards which comply with industrial standard, i.e: NEC, IEC, NFPA, IEEE, ATEX, API ETC.
3. Review engineering documents end project deliverables misted with electrical engineering end ensure the design comply with company specifications/code standards.
4. Provide inputs, recommendations and assurances on the comprehensive electrical engineering integrity throughout all company fields..
Requirement:
1. Degree in electrical engineering with at least 10 years working experience in oil and gas Industry.
2. Possess strong knowledge in oil & gas facilities design & operations, also master in electrical engineering standard and codes.
3. Strong knowledge in power system analyze and design, transmission and distribution, fire & explosion protective systems also hazardous area classification
4. Familiar with electrical engineering software and tools La: ETAP, EDSA, CANECO, CALCULUX, ExSILintia ETC.
SENIOR PROJECT QA/QC (PQA/QC) & QA/QC ENGINEER (QA/QC Eng)
Responsibility:
1. Develop and Implement company quality manual/inspection test plan is meet quality Industry standards for oil and gas industry.
2. Develop quality audit to ensure quality manual is followed.
3. Review technical/engineering deliverable to ensure the quality criteria is fulfilled.
4. Review and approve contractor project quality system/plan.
Requirement:
1. Degree in mechanical or structural or other related engineering with at leant 10 years working experience (PQA/QC) and 5 years working experience ) QA/QC Eng) in oil and gas industry.
2. Knowledge in quality Management System for oil and gas Industry and 1S09000 is preferred.
3. Experienced in quality System Audit hr Refinery or Petrochemical Plant works.
4. Review with industrial code/standard for oil and gas Industry.
5. Good leadership and has an excellent communications skill amongst horizontal and vertical lines in the specifications
6. Having a certification on QMS Auditor and/or one of equipment, welding is a plus.
FABRICATION S MODIFICATION ENGINEER (FME)
Responsibility:
1. Plan and coordinate site survey related with measurement & constructability that era to be carried out by fabrication & modification team and contractor as well.
2. Track and monitor the site survey implementations and cream the progress comply with plan and requirement
3. Review all the sketches made by surveyor and converted into electronic drawing (CAD).
4. Review drawing and material take off and ensure them comply with company specifications.
5. Keep and maintain engineering database raided with engineering standards, code and practices and control & manage fabrication and modification drawing database.
Requirement:
1. Degree in mechanical, civil or metallurgical engineering with at cent 10 years working onshore and offshore work experience in oil and gas industry.
2. Familiar with applicable codes, standards, regulation pertaining to welding/construction/fabrication of vessel, piping, structural, and pipeline.
VALVE MAINTENANCE ENGINEER (VME)
Responsibility:
1. Ensuring quality assurance of valve maintenance services in accordance with company s standards, procedures and industry standards.
2. Improving quality service in valve maintenance area to reduce unplanned equipment problems end sustain company production and operation integrity.
3. Develop maintenance technical documents and procedure and working in the field to ensure timely execution of the valve and instrumentation maintenance services as per recommendations, RCFA analysis end company s Generic Maintenance Strategy (GMS).
Requirement:
1. Degree in mechanical engineering withal least of 7 years working experience in quality assurance and maintenance engineering.
2. Possess strong knowledge in the operation and maintenance of valve practices including its workshop repair.
3. Engineering design experience and working knowledge of valves, process and piping.
4. Familiar with various valve manufacturers in Oil and Gas Industry.
ELECTRICAL MAINTENANCE ENGINEER (EME)
Responsibility:
1. Ensure quality assurance of electrical power generation, distribution, motors and other Ex electrical equipments maintenance in accordance with company s standards, procedures end industry standards.
2. Improve quality service in electrical area to reduce unplanned equipment problems end sustain company production and operation integrity through consistent review of maintenance data.
3. Develop maintenance technical documents end procedures and to ensure timely execution of the electrical equipment maintenance services as per recommendations, RCFA analysis end company s Generic Maintenance Strategy (GMS).
Requirement:
1. Degree in electrical engineering with at least 7 years working experience quality assurance end maintenance engineering.
2. Engineering design experience and working knowledge of power generation, distribution, protections in hazardous area.
3. Possess strong knowledge in the maintenance at electrical generators, distributions, protection, motor and electrical equipments.
4. Familiar with various electrical equipment manufacturers in Oil and Gas Industry.
MECHANICAL MAINTENANCE ENGINEER (MME)
Responsibility:
1. Ensure quality assurance of pumps, compressors, diesel/gas engines and safety equipment maintenance in accordance with COMPANY standards, procedures end industry standard.
2. Improve quality service in mechanical area is reduce unplanned equipment problems and sustain company production and operation integrity through consistent review of maintenance data.
Requirement:
1. Degree in mechanical engineering with at least 1 years working experience in quality assurance end maintenance engineering.
2. Engineering design experience end working knowledge of mechanical equipment end general knowledge about - equipment
3. Possess strong knowledge is the maintenance of pumps, compressors and diesel/gas engines.
You will be a self starter with strong Interpersonal and team working skills and will be fluent In English end Bahasa Indonesia. Forward your complete resume and recent photograph with interested position in your email address to:
recruitment.pheonwj@pertamina.com
Applications close 18 march 2010.
Commonwealth Bank Indonesia adalah jaringan bank besar internasional dari Commonwealth Bank Australia. Di Indonesia, Commonwealth Bank telah hadir di berbagai kota seperti Jakarta, Semarang, Surabaya, Medan, Bandung, Balikpapan, Makassar dan beberapa kota lainnya.
PT Elnusa Tbk. merupakan satu-satunya perusahaan nasional yang menyediakan jasa dalam pencarian minyak dan gas bumi secara terpadu dengan menyediakan solusi total dari mulai survey potensi minyak & gas (seismik), kegiatan pemboran, hingga pemeliharaan sumur-sumur lapangan produksi minyak & gas. Langkah besar Elnusa untuk fokus di kegiatan bisnis inti pada akhir 2007, direspon positif pasar dalam waktu singkat.
FUJI PRESISI TOOL INDONESIA is the joint venture company that sell and manufacture cemented carbide cutting tool, tool holder, and jig for domestic markets well as the export market. Lokasi pabrik PT. FUJI PRESISI TOOL INDONESIA berada di Cikarang Bekasi, Jawa Barat. Untuk meningkatkan kemajuan perusahaan dan ekspansi bisnis yang lebih luas. PT. FUJI PRESISI TOOL INDONESIA membuka lowongan kerja baru tahun 2010. Berikut ini adalah detail 
Sebagai salah satu bank swasta dengan reputasi yang baik dan memiliki 35 cabang dan 175 sub cabang, bank UOB Buana terus melakukan peningkatan pembenahan dan perbaikan demi kepuasan nasabah. Untuk mendukung itu, bank UOB Buana membutuhkan sumber daya manusia yang siap pakai dan sesuai kebutuhan perusahaan.
Salah satu perusahaan BUMN kebanggan Indonesia adalah Bank Mandiri. Mulai beroperasi sejak 2 Oktober 1998, bank Mandiri telah tumbuh menjadi bank dengan omset terbesar di Indonesia. Berbagai layanan bisnis bank Mandiri telah tersedia antara lain: segmen usaha Corporate, Commercial, Micro & Retail, Consumer Finance dan Treasury & International. Bank Mandiri juga menawarkan jasa pasar modal, perbankan syariah dan asuransi melalui Mandiri Sekuritas, Bank Syariah Mandiri dan AXA Mandiri.
Acer Indonesia ranks among the world’s top ten branded PC vendors, designing and marketing easy, dependable IT solutions that empower people to reach their goals and enhance their lives. In 2000, Acer spun-off its manufacturing operation to focus on globally marketing its brand-name products: desktop and mobile PCs, servers and storage, displays, peripherals, and e-business solutions for business, government, education, and home users. Vision A reputable winner in the knowledge-based economy through innovative business models, and marketing of IT products and services. Mission Breaking barriers between people and technology signifies the company’s long-term vision and direction, to bridge the gap between technology and its users.
PT. Metrodata Electronics, Tbk adalah sebuah perusahaan swasta nasional yang didirikan pada tanggal 17 Februari 1983 sebagai salah satu Perseroan dalam kelompok usaha METRODATA yang bergerak di bidang teknologi informasi sejak tahun 1975.
PT Bank Bumiputera Tbk yang berganti nama menjadi PT Bank ICB Bumiputera Tbk adalah salah satu perusahaan swasta terkemuka di Indonesia yang fokus pada di bidang keuangan. Dalam rangka menghadapi persaingan bisnis bank yang semakin ketat, management bank ICB Bumiputera membutuhkan sumber daya manusia siap pakai.
PT. IBM Jasa Teknologi Informasi adalah salah satu perusahaan internasional yang bergerak di bidang telekomunikasi, bank, pertambangan minyak bumi dan gas, berbagai alat mesin hingga jasa asuransi. Dalam perkembangan bisnisnya di Indonesia, PT. IBM Jasa Teknologi Informasi telah mengalami kemajuan bisnis yang cukup pesat.
PT. Sharp Electronics Indonesia adalah perusahaan internasional dari Jepang yang bergerak memproduksi berbagai elektronik seperti TV, mesin cuci, AC dan peralatan elektronik lainnya. Dalam rangka meningkatkan kinerja perusahaan, PT Sharp Electronics Indonesia membuka lowongan kerja baru di tahun 2010 ini.
PT. Kalbe Farma Tbk merupakan salah perusahaan swasta besar nasional yang juga melakukan ekspansi kerja hingga ke luar negeri. Untuk semakin meningkatkan kualitas layanan dan kemajuan perusahaan, PT. Kalbe Farma Tbk membuka lowongan kerja untuk posisi Finance Accounting Officer dan Engineering. 
Bank Mega adalah salah satu bank swasta terdepan di Indonesia. Dalam perkembangan bisnisnya, bank Mega telah menjangkau sebagian besar wilayah Indonesia dari Sabang hingga Merauke. Bank Mega juga merupakan bank peserta LPS atau Lembaga Penjamin Setoran, sehingga setiap dana dari nasabah dijamin pemerintah.
Bank OCBC NISP since its establishment in 1941 has been consistently implementing the prudential banking principles and has succeeded to conduct a healthy banking practices and survive through many crises in Indonesia. Along with its aim to be one of the National Bank in 2010 based on the API (Indonesian Banking Architecture), Bank OCBC NISP continues to develop high quality products and increases its relations with costumers by opening many new offices in various major cities and districts.
Holcim Indonesia is paving the way for Indonesia developers. The country's third-largest cement maker and construction materials manufacturer, Holcim Indonesia has grown into a dominant construction materials supplier since it was founded in 1971. With two cement plants and a grinding facility, it has the capability to produce some 8.5 million tons of cement per year. Cement Holcim Indonesia's bread and butter, comprising some 90% of total revenues. Through subsidiary Holcim Beton, the company also produces ready-mix concrete and aggregates. The company sells its products from a network of more than 9,000 retail outlets. Globalcement giant Holcim controls some 77% of Holcim Indonesia.
